Öppnas inte PayPals inloggningssida?

Klicka här
för att försöka igen.

Din beställning behandlas. Tack för ditt tålamod.

Cube Summer Sale - Äntligen rabatt på CUBE! | UPP TILL 20% RABATT

Företagskund

SKF

SKF MTRX Solid Oil Deep Groove Ball Bearing 17x30x7mm ISO 61903 silver (2019)

ID: 983570
189 kr
pris exkl. frakt
Lägg till i önskelista
  • 100 dagars öppet köp, Fri retur
  • Fri frakt över 750 kr, cyklar över 4995 kr6
  • 40 000 produkter 500 märken
Produktbeskrivning

Det finns ingen produktbeskrivning på svenska till den här produkten, men kontakta gärna vår kompetenta kundtjänst om du undrar något.

The polymer matrix impregnated with oil lubricates and protects the bearing even under the toughest operating conditions and ensures a significantly longer service life even when using high-pressure cleaners! The deep groove ball bearings have been developed for bearing arrangements where high humidity, occasional contact with water or heavy contamination cause major problems. Bearings with Solid Oil are lubricated for life and cannot be relubricated.

Solid Oil
Solid oil is an oil-impregnated polymer matrix which is pressed into the free space of the bearing. The remaining, very small gap between the matrix and the rolling elements, the raceways and the cage allows the unhindered circulation of the bearing parts. The bearing has a porous structure with millions of microscopically small pores so that the surface tension is sufficient to retain the oil.

Bearing Properties
An increase in the operating temperature transports the oil to the surface of the polymer matrix and ensures an even lubricant supply. In the event of an operating standstill, the oil that has already escaped is absorbed again by the filler. Solid oil bearings contain a large amount of oil (two to four times more than conventional grease lubrication). A high-quality synthetic oil with high oxidation resistance is used as standard for solid oil.


Resists washing out
Solid Oil cannot be washed out; it fills the entire free space in the bearing. This keeps moisture penetration to a minimum. The water cannot mix with the oil or solid oil polymer matrix.


Good protection against contamination
The very small gap between the solid oil polymer matrix and the rolling elements or raceways practically excludes the penetration of impurities. Integrated bearing seals additionally increase the sealing effect.

Detaljer

  • Reduced risk of corrosion
  • Longer lubricant service life
  • Low environmental impact
  • Load carrying capacity of bearings with Solid Oil corresponds to that of standard bearings
Specifikation
Tillbehörstyp
Ball bearing  
Syfte
Universal  
Material
100Cr6 rolling bearing steel  
Storleksinformation
17 x 30 x 7 mm  
Inkluderar
Ingår i leveransen: 1x Solid Oil deep groove ball bearing  
Kön
Unisex
Aktuell i vårt sortiment
2019
Produktnummer
983570
Andra kunders omdömen
Tyck till. Bli först med att betygsätta den här produkten.

BEHÖVER DU HJÄLP?
Kontakta vår kundtjänst:
Mån-Fre 10:00-12:00 & 13:00-16:00
08 - 4030 4702
NYHETSBREV
Anmäl dig till vårt nyhetsbrev nu,
få ett presentkort till ett värde av 80 kr4.
Bra erbjudanden och information om nya produkter väntar!

BIKESTERS DATASÄKERHET
Everyday we get more people on bikes