Öppnas inte PayPals inloggningssida?

Klicka här
för att försöka igen.

Din beställning behandlas. Tack för ditt tålamod.

Trendig innovation – Cyklar från märken i framkant


Just nu har vi inte den här produkten i lager. Om du vill få information om när den finns tillgänglig igen så kan du lämna din e-postadress.

Alpina Garbanzo Helmet black-neon-yellow (2020)

ID: 899748
1 035 kr
905 kr
- 12%
inkl. skatt, Fri frakt
Alpina Garbanzo Helmet black-neon-yellow
Alpina Garbanzo Helmet black
Tyvärr är produkten inte längre tillgänglig.
Vi kan skicka ett mail till dig när varan går att beställa igen.

Lägg till i önskelista
  • 100 dagars öppet köp, Fri retur
  • Fri frakt över 750 kr, cyklar över 4995 kr6
  • 40 000 produkter 600 märken

Det finns ingen produktbeskrivning på svenska till den här produkten, men kontakta gärna vår kompetenta kundtjänst om du undrar något.

If you like trails, you'll love the Garbanzo. The Enduro helmet was specially developed for use in rough terrain. Its striking features are its flat polycarbonate cover for the best possible protection of the top of the head and the optically integrated shield. Air is directed to the inside of the helmet for ideal ventilation and is guided along the head via channels in the Hi-EPS. The low weight of the Garbanzo is due to the Inmold production, in which the upper shell is thermally connected to the Hi-EPS. This results in a firm surface connection, which is responsible for a very stable construction.

Fly screens keep insects away from the head, the large shield guarantees optimum protection in the visible area. The tail and the temples are pulled down for optimal safety in the terrain. The result is an even larger head cover.

The lower edge of the helmet is protected by the Edge Protect polycarbonate shell. With the Run System Ergo Pro, which is combined with the height-adjustable Custom Fit, the helmet can be perfectly adapted to the head. A further plus for comfort: the removable, antibacterial padding. With it you always have a pleasant wearing feeling - no matter how hot it gets in the terrain.

Run System Ergo Pro
The Run System allows the size of all Alpina helmets to be individually adjusted using a smooth-running rotating wheel. The two large wing-shaped headrests are striking features of the high-quality Ergo Pro Run System. They are made of a two-component mix of plastic and rubber. This guarantees maximum comfort. Since the year 2014 the Run System Ergo Pro is available in colours matching the helmet.

A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixation of the two straps under the ear plays a decisive role. The Y-Clip system guarantees millimetre-precise adjustment - in a matter of seconds.

Proven hundreds of thousands of times and used on all Alpina helmets: the belt buckle with the red push button and multi-stage automatic snap-in mechanism. Ergomatic can be operated with one hand - you can loosen the strap uphill, tighten it downhill - and in the event of a fall it is not possible for the locking mechanism to open automatically.

Airflow Vents
One factor that strongly influences the wearing comfort is the ventilation of the helmet. The strategically sensible arrangement of the ventilation openings is decisive for optimum ventilation of the interior. The air is directed into the interior, directed along the head and can then flow out again at the rear. The head is therefore always pleasantly air-conditioned.

The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrene). The material has microscopically small air chambers which absorb the forces acting on the helmet in the event of an impact. Hi-EPS provides optimum protection and at the same time enables extra-thin wall thicknesses and narrow helmet shapes.

In the Inmold production process, the polycarbonate helmet shell is thermally bonded to the Hi-EPS inner shell of the helmet body under great heat and pressure. This creates a large-area and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely stable.

Ceramic Shell
All Alpina helmets manufactured using the Inmold process receive a robust Ceramic Shell. A polycarbonate plate is stretched under high heat onto the shape of the later helmet and pressed under high pressure onto the Hi-EPS body and thermally connected to it. The Ceramic Shell is characterized by several qualities: It is break- and scratch-resistant, UV-stable and antistatic.

Edge Protect
Edge Protect is an additional polycarbonate sheet that refines Inmold helmets. It covers edges on the underside of the helmet. This protects the Hi-EPS and increases the longevity of the helmet. At the same time, the neck and shoulder area of the rider is protected against injuries from the helmet in the event of an impact and contact with the lower edge of the helmet.

Freeride / Downhill, MTB
Med justerbart bälte  
Run System ERGO PRO, Y-Clip  
EN 1078  
Polykarbonat, EPS  
Aktuell i vårt sortiment
Andra kunders omdömen
7 omdömen
5 stjärnor
4 stjärnor
3 stjärnor
2 stjärnor
1 stjärna
Mycket nöjd
Sehr zufrieden
Automatiskt översatt från tyska Tillbaka till originalspråk

Stor hjälm, fin lättvikt, bra stängning, bekväm att bära

Toller Helm, schön leicht, klasse Verschluß, angenehm zu tragen

Automatiskt översatt från tyska Tillbaka till originalspråk

Riktigt bra produkt 👍

Wirklich gute Produkt 👍

Sven Hollywood
Top Helm
Automatiskt översatt från tyska Tillbaka till originalspråk

Sitter bra är fint ljus och super bekvämt.

Sitzt gut ist schön leicht und super bequem.

Kontakta vår kundtjänst:
Mån-Fre 10:00-12:00 & 13:00-16:00
08 - 4030 4702
Anmäl dig till vårt nyhetsbrev nu,
få ett presentkort till ett värde av 80 kr4.
Bra erbjudanden och information om nya produkter väntar!

Everyday we get more people on bikes