Öppnas inte PayPals inloggningssida?

Klicka här
för att försöka igen.

Din beställning behandlas. Tack för ditt tålamod.

Säsongsutförsäljning - Över 1000 Cyklar | Upp till 40% rabatt

Företagskund

Alpina

Alpina Alpina Anzana Helmet white (2019)

ID: 899793
729 kr
pris exkl. frakt
Alpina Alpina Anzana Helmet white
Alpina Alpina Anzana Helmet black-neon-yellow
Alpina Alpina Anzana Helmet orange-black
Alpina Alpina Anzana Helmet darksilver-black-red
Vilken storlek passar mig?
Vänligen Välj
Lägg till i önskelista
  • 100 dagars öppet köp, Fri retur
  • Fri frakt över 750 kr, cyklar över 4995 kr6
  • 40 000 produkter 500 märken
Produktbeskrivning

Det finns ingen produktbeskrivning på svenska till den här produkten, men kontakta gärna vår kompetenta kundtjänst om du undrar något.

The ALPINA ANZANA is priced in the entry-level Enduro range. Nevertheless, it is equipped with top features from ALPINA's technology box and thus offers an outstanding price/performance ratio. Above all, the high-quality Run System Ergo Plus guarantees optimum grip. With its fine grid it can be perfectly adapted to the head. In addition, the height of the adjustment system can be adjusted via the integrated Custom Fit System. This results in a secure fit and optimum protection. The outer shell of the helmet consists of a robust polycarbonate plate that is thermally connected to the Hi-EPS using the in-mold process. This results in a firm surface connection, which results in an additional plus in stability. Thanks to Made in Germany, maximum production quality is guaranteed at the same time.

The equipment list of the ALPINA ANZANA also includes the large shield that protects the viewing area, antibacterial and washable padding for high comfort and a fly screen in the front ventilation openings. You're perfectly prepared for your next Enduro experience. Thanks to the new ALPINA ANZANA.

Run System Ergo Pro
The Run System allows the size of all Alpina helmets to be individually adjusted using a smooth-running rotating wheel. The two large wing-shaped headrests are striking features of the high-quality Ergo Pro Run System. They are made of a two-component mix of plastic and rubber. This guarantees maximum comfort. Since the year 2014 the Run System Ergo Pro is available in colours matching the helmet.

Y-Clip
A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixation of the two straps under the ear plays a decisive role. The Y-Clip system guarantees millimetre-precise adjustment - in a matter of seconds.

Ergomatic
Proven hundreds of thousands of times and used on all Alpina helmets: the belt buckle with the red push button and multi-stage automatic snap-in mechanism. Ergomatic can be operated with one hand - you can loosen the strap uphill, tighten it downhill - and in the event of a fall it is not possible for the locking mechanism to open automatically.

Edge Protect
Edge Protect is an additional polycarbonate sheet that refines Inmold helmets. It covers edges on the underside of the helmet. This protects the Hi-EPS and increases the longevity of the helmet. At the same time, the neck and shoulder area of the rider is protected against injuries from the helmet in the event of an impact and contact with the lower edge of the helmet.

Airflow Vents
One factor that strongly influences the wearing comfort is the ventilation of the helmet. The strategically sensible arrangement of the ventilation openings is decisive for optimum ventilation of the interior. The air is directed into the interior, directed along the head and can then flow out again at the rear. The head is therefore always pleasantly air-conditioned.

HI-EPS
The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrene). The material has microscopically small air chambers which absorb the forces acting on the helmet in the event of an impact. Hi-EPS provides optimum protection and at the same time enables extra-thin wall thicknesses and narrow helmet shapes.

inmold
In the Inmold production process, the polycarbonate helmet shell is thermally bonded to the Hi-EPS inner shell of the helmet body under great heat and pressure. This creates a large-area and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely stable.

Ceramic Shell
All Alpina helmets manufactured using the Inmold process receive a robust Ceramic Shell. A polycarbonate plate is stretched under high heat onto the shape of the later helmet and pressed under high pressure onto the Hi-EPS body and thermally connected to it. The Ceramic Shell is characterized by several qualities: It is break- and scratch-resistant, UV-stable and antistatic.

Custom Fit
Custom Fit is an adjustment system at the back of the head that allows you to adjust the height of the Run System in several stages. This allows the optimum fit of the helmet to be adjusted for a wide range of head shapes. Pressure points are a thing of the past, the fit of the helmet is perfect and safety is increased.

Specifikation
Syfte
MTB, Freeride / Downhill
Hjälmkonstruktion
In-Mold-teknologi  
Justeringssystem
Run System ERGO PRO, Custom Fit, Y-Clip  
Förslutningssystem
Vridhjul  
Vaddering
Antibacterial, removable and washable pads  
Visir
Skärm  
Egenskaper
Myggnät  
Godkänd
EN 1078  
Material
Polykarbonat, EPS  
Kön
Unisex
Aktuell i vårt sortiment
2019
Produktnummer
899793
Andra kunders omdömen
Tyck till. Bli först med att betygsätta den här produkten.

BEHÖVER DU HJÄLP?
Kontakta vår kundtjänst:
Mån-Fre 10:00-12:00 & 13:00-16:00
08 - 4030 4702
NYHETSBREV
Anmäl dig till vårt nyhetsbrev nu,
få ett presentkort till ett värde av 80 kr4.
Bra erbjudanden och information om nya produkter väntar!

BIKESTERS DATASÄKERHET
Everyday we get more people on bikes